SEALERS PLUS ENHANCE N SEAL STONE, ENCAUSTICS, GROUT, CONCRETE 1LT

Premium Sealer & Colour Enhancer KEY FEATURES NanoPlus Formula for Deep Protection - Low VOC; Darkens - Enhances - Highlights & Rejuvenates Colour; Maximum Stain Resistance Against Oil, Food and Grime; Reduces Freeze/Thaw Damage, Spalling and Efflorescence; Latest State of the Art Poly Seal Technology - 100% Active Solids; UV Resistant - Non Flammable - Inhibits Algae, Mould and Mildew; For Wall, Floor, Interior, Exterior, Domestic & Commercial Applications. Enhance'N'Sealâ„¢ is a 100% Actives, premium, penetrating, no sheen sealer & colour enhancer. For maximum stain resistance and to enhance, darken, highlight & rejuvenate colour. Non-Flammable, Non-Yellowing and UV Resistant. Can be used as a pre-grouting sealer. Breathable - Allows Moisture Vapour Transmission (MVT). Reduces Freeze/Thaw Damage, Spalling & Efflorescence. Inhibits Mould & Mildew growth. For indoor, outdoor, domestic & commercial areas. Safe for food preparation areas. USE: For porous surfaces e.g. all natural stone like basalt, bluestone, granite, limestone, marble, quartzite, sandstone, slate, travertine etc plus porcelain tiles, encaustic tiles, terrazzo, concrete, pavers, saltillo, grout and other surfaces where a colour enhanced look and maximum stain and water protection is required. Note: For high traffic, commercial or food areas or where premium performance/stain resistance is required - for a natural look use AQUA-SEAL GOLD+ and for a colour enhanced, enriched look use ENHANCE'N'SEAL. COVERAGE: Approx 10-40m2 per 1 litre per coat. Will vary depending on the density, porosity, texture and absorption. Also weather conditions, application method and number of coats required. Full coverage chart at SURFACE FINDER See table below as a guide (per 1L, per coat). - Bluestone Flamed 15-20 m2 - Encaustic Tiles 15-20 m2 - Marble Honed 20-25 m2 - Sandstone 10-15 m2 - Travertine Honed 20-25 m2 - Terrazzo Honed 20-25 m2